|Home||» Products||» Electric Chain Hoist|
Electric Chain Hoist
Our company is one of the progressive & prominent manufacturers, suppliers and exporters of Electric Chain Hoist. Our offered range consist of efficient motor, safety hooks, limit switches and push button. Manufactured using tested quality metals, these chain hoists are reliable, sturdy in construction and have a long service life. These chain hoists are primarily used for loading or unloading purpose. Furthermore, we have a team of expert quality controllers, which checks Electric Chain Hoist on various parameters to assure zero defects.
Kohinoor Brand Chain Electric Hoist are designed for higher factor of safety. All Components are precision made and assembled with great care by use of jigs and fixtures for noise less operation.
Steel Cast, Machine finished to suit load chain.
Wear resistance. Heat treated, grade 80 special alloy steel Link chain as per I.S. 6216.
Precision cut special steel spur gear with both the ends mounted on ball bearings for smooth operation.
Disc type Fail Safe Electromagnetic spring loaded breaks are provided for heavy duty operations. Brakes are of fail safe type, which means in case of failure of electric supply brake acts immediately, brakes are mounted on the non driving end of the motor and are easily accessible
The Hook Block is tested to 150% of full Load before assembly. The Heavy duty steel forged hooks conforming to I.S. 8610 are support on thrust bearing for free swivelling.
It consists of M.S. Plates forming side frame assembled with runner Wheels are mounted on Double sealed Ball Bearings. Trolley is adjustable for various I Beam sizes.
A limit switch is built in as one of many safety features preventing accidental over hoisting and over lowering of the hook block.
Ele. Control panel & Limit Switches
Controls are Mechanically & Electrically Interlock to prevent inade- vertent operation. A low voltage control system with 24 volts. Limit switches are given for preventing over hoisting or over lowering of hook.The Tri positions are adjustable to allow correct setting for installation.
Pendent Push Button
Robust heavy duty push button switch for operating at 110 volts or 24 volts is suspended from the hoist. Push button is provided with wire rope to prevent pull on cable.
The Hoists are suitable for class II medium duty operations.
Our Engineering department continuously works on design improvement and we reserves the right of effecting any change found necessary without notice.
A Guarantee is provided for the repair and replacement, which proves defective material or workmanship within one year of the sale on Ex.Works basis. However electrical appliances are not covered in this guarantee.
Every Hoist is tested on 125% of its safe working load, before dispatch and is issued with a Test Certificate.